Hazard Identification and Risk Assessment In EOT Crane Operations
DOI:
https://doi.org/10.15662/IJEETR.2026.0802180Keywords:
Safety, Hazard, Identification, Risk, Control MeasuresAbstract
Hazard Identification and Risk Assessment or HIRA system can act as a risk assessment tool which will assist users in identifying hazard and estimating risk involved in each identified hazard. This risk assessment tool will identify possible hazard involved in each task in departments. Once the hazard has been identified, risks involved will be estimated and categorized. If the estimated risk falls in a category, which is higher than the low-risk category, then possible control measures will be recommended. At the same time, the user can add new work plan, task,and control measures in to the system to update existing information system
References
1. Sheth, P. N., et al. "A systematic analysis of structural failure and hazard identification in overhead EOT crane girders."Journal of Failure AnalysisandPrevention18.3(2018):
2. 542-558.
3. Kjellén, U., and Albrechtsen, E. "Prevention of accidents through occupational health and safety management in crane operations."Safety Science 11.2 (2017): 112-124.
4. Zhang, L., et al. "Risk assessment of tower and EOT crane safety based on fuzzy comprehensive evaluation."SafetyScience50.7(2012):1565-
5. 1571.
6. Suruda, A., et al. "Fatal injuries caused by electric overhead traveling cranes in the manufacturing industry."American Journal of Industrial Medicine 31.2 (1997): 227-232.
7. C.Nagarajan and M.Madheswaran - ‘Stability Analysis of Series Parallel Resonant Converter with Fuzzy Logic Controller Using State Space Techniques’- Taylor &Francis, Electric Power Components and Systems, Vol.39 (8), pp.780-793, May 2011. DOI: 10.1080/15325008.2010.541746
8. C.Nagarajan and M.Madheswaran - ‘Experimental verification and stability state space analysis of CLL-T Series Parallel Resonant Converter’ - Journal of Electrical Engineering, Vol.63 (6), pp.365-372, Dec.2012. DOI: 10.2478/v10187-012-0054-2
9. C.Nagarajan and M.Madheswaran - ‘Performance Analysis of LCL-T Resonant Converter with Fuzzy/PID Using State Space Analysis’- Springer, Electrical Engineering, Vol.93 (3), pp.167-178, September 2011. DOI 10.1007/s00202-011-0203-9
10. S.Tamilselvi, R.Prakash, C.Nagarajan,“Solar System Integrated Smart Grid Utilizing Hybrid Coot-Genetic Algorithm Optimized ANN Controller” Iranian Journal Of Science And Technology-Transactions Of Electrical Engineering, DOI10.1007/s40998-025-00917-z,2025
11. S.Tamilselvi, R.Prakash, C.Nagarajan,“ Adaptive sliding mode control of multilevel grid-connected inverters using reinforcement learning for enhanced LVRT performance” Electric Power Systems Research 253 (2026) 112428, doi.org/10.1016/j.epsr.2025.112428
12. S.Thirunavukkarasu, C. Nagarajan, 2024, “Performance Investigation on OCF and SCF study in BLDC machine using FTANN Controller," Journal of Electrical Engineering And Technology, Volume 20, pages 2675–2688, (2025), doi.org/10.1007/s42835-024-02126-w
13. C. Nagarajan, M.Madheswaran and D.Ramasubramanian- ‘Development of DSP based Robust Control Method for General Resonant Converter Topologies using Transfer Function Model’- Acta Electrotechnica et Informatica Journal , Vol.13 (2), pp.18-31,April-June.2013, DOI: 10.2478/aeei-2013-0025.
14. C.Nagarajan and M.Madheswaran - ‘DSP Based Fuzzy Controller for Series Parallel Resonant converter’- Springer, Frontiers of Electrical and Electronic Engineering, Vol. 7(4), pp. 438-446, Dec.12. DOI 10.1007/s11460-012-0212-0.
15. C.Nagarajan and M.Madheswaran - ‘Experimental Study and steady state stability analysis of CLL-T Series Parallel Resonant Converter with Fuzzy controller using State Space Analysis’- Iranian Journal of Electrical & Electronic Engineering, Vol.8 (3), pp.259-267, September 2012.
16. C.Nagarajan and M.Madheswaran, “Analysis and Simulation of LCL Series Resonant Full Bridge Converter Using PWM Technique with Load Independent Operation” has been presented in ICTES’08, a IEEE / IET International Conference organized by M.G.R.University, Chennai.Vol.no.1, pp.190-195, Dec.2007
17. Suganthi Mullainathan, Ramesh Natarajan, “An SPSS and CNN modelling based quality assessment using ceramic materials and membrane filtration techniques”, Revista Materia (Rio J.) Vol. 30, 2025, DOI: https://doi.org/10.1590/1517-7076-RMAT-2024-0721
18. M Suganthi, N Ramesh, “Treatment of water using natural zeolite as membrane filter”, Journal of Environmental Protection and Ecology, Volume 23, Issue 2, pp: 520-530,2022
19. Vujicic, A., et al. "Evaluation of hazard identification for EOT cranes in maritime port environments."Maritime Policy & Management 40.5 (2013): 480-495.
20. Reason, J. "Human error: models and management in high-risk industrial systems."British Medical Journal 320.7237 (2000): 768-770.
21. Sudha, N., Kumar, S. S., Rengarajan, A., & Rao, K. B. (2021). Scrum Based Scaling Using Agile Method to Test Software Projects Using Artificial Neural Networks for Block Chain. Annals of the Romanian Society for Cell Biology, 25(4), 3711-3727.
22. Sugumar, R. (2025). Designing Resilient and Scalable Cloud-Native Frameworks for Generative AI Content Production. International Journal of Research Publications in Engineering, Technology and Management (IJRPETM), 8(6), 13268-13279.
23. Anbazhagan, K. (2025). AI Driven Zero Trust Security Model for Enterprise Data Protection and Intelligent Infrastructure Management. International Journal of Technology, Management and Humanities, 11(03), 101-107.
