Design and Fabrication of a Solar Powered Semi-Automatic Sugarcane Bud Cutting Machine
DOI:
https://doi.org/10.15662/IJEETR.2026.0802191Keywords:
Agriculture, Sugar Cane, Solar Panel, DC Motor, CuttersAbstract
The Solar Powered Battery Operated Semi-Automatic Sugarcane Bud Cutting Machine is designed to improve the efficiency of sugarcane cultivation by automating the bud cutting process. Traditionally, farmers manually cut sugarcane buds, which is labor-intensive, time-consuming, and often results in uneven sizes. Uneven bud cutting can reduce germination rates and affect overall crop yield. This machine addresses these challenges by providing a semi-automatic solution that ensures uniform and precise cutting of sugarcane buds.The machine operates using a battery-powered motor, which is charged using a solar panel. This makes the system eco-friendly, cost-effective, and suitable for use in remote agricultural fields without access to electricity. The solar-assisted design ensures that the machine can work continuously during the day, reducing downtime and dependence on conventional power sources.A simple feeding mechanism guides sugarcane stalks to sharp rotating blades, cutting the buds efficiently with minimal human effort. The semi-automatic operation allows the operator to control the process while reducing fatigue and increasing productivity. The machine is also portable, lightweight, and easy to operate, making it ideal for small and medium-scale farmers.By integrating renewable energy with automation, this machine not only reduces labor and operational costs but also promotes sustainable farming practices. It has the potential to significantly improve planting efficiency, ensure consistent crop growth, and support modern, eco-friendly agricultural methods
References
1. D. Zhou, Y. Fan, G. Deng, F. He, M. Wang, A new design of sugarcane seed cutting systems based on machine vision, Comput. Electron. Agric. 175 (August 2020) 105611C.
2. Prof. Dipak U.Adhapure , Kkolekar Navnath Chandrakantat, Gadhave Akash Shamrao, Kadam Sunil Dattatray, Design Development and Fabrication of Sugarcane Bud Cutting Machine, IJSRD, Volume : 6, Issue : 12.
3. Krishna Prasads, Harish Kumar, Harsha B. G , Harshith .S, Kishan Kumar, Design and Fabrication of Sugarcane Bud Cutting Machine, International Journal of Engineering Science and Computing, July 2017.
4. Ningappa H Kuri, Prof.Reddy Naik.J, Design and Development of Sugar Cane Bud Chipping Machine, international journal of research in aeronautical and mechanical engineering issn (online): 2321-3051, Vol.3 Issue 12, December 2015 Pgs: 97-110
5. Rajkumar.E, Manojkumar.E, Virtual Prototype and 3D Printing of Bud Chipping Machine for Agriculture, International Journal of Innovative Technology and Exploring Engineering (IJITEE) ISSN: 2278-3075,Volume-8, Issue-12S, October 2019.
6. G.Ragupathi, A.Ramesh Kumar, V.Selva Prakash, G.Sivaprakasam, E. Thirumoorth, Design and fabrication of pneumatic sugarcane bud cutting machine, International Journal of Advanced Science and Engineering Research, Vol 2, issue :1, 2017.
7. Roshanlal Vishwakarma, Sugarcane bud chipper, Fifth National Grassroots Innovation, Patent No. 1501/MUM/2008
8. Vishrut Raut, Prof.S.M.Fulmali, Design &Modelling of Mobile Chaff Cutter a Review, International Conference on Ideas, Impact and Innovation in Mechanical Engineering (ICIIIME2017).
9. Chinmay Bandiwadekar, Ajinkya Kamble, VivekGarala, ZuberShaikh. Review Paper on Design & Development of Chaff Cutting Machine. IJSRD - International Journal for Scientific Research & Development| Vol. 4, Issue 02, 2016 | ISSN (online):2321-0613.
10. Kalaiselvan P, Kesavan P, Satheeshkumar p, Karthikeyan m, Sakthivel, Baluvenkatesh, Fabrication And Performance Measurement Of Manually Powered Fodder Cutter, International Journal of Scientific & Engineering Research, Volume 7, Issue 5,May-2016
11. C.Nagarajan and M.Madheswaran - ‘Stability Analysis of Series Parallel Resonant Converter with Fuzzy Logic Controller Using State Space Techniques’- Taylor &Francis, Electric Power Components and Systems, Vol.39 (8), pp.780-793, May 2011. DOI: 10.1080/15325008.2010.541746
12. C.Nagarajan and M.Madheswaran - ‘Experimental verification and stability state space analysis of CLL-T Series Parallel Resonant Converter’ - Journal of Electrical Engineering, Vol.63 (6), pp.365-372, Dec.2012. DOI: 10.2478/v10187-012-0054-2
13. C.Nagarajan and M.Madheswaran - ‘Performance Analysis of LCL-T Resonant Converter with Fuzzy/PID Using State Space Analysis’- Springer, Electrical Engineering, Vol.93 (3), pp.167-178, September 2011. DOI 10.1007/s00202-011-0203-9
14. S.Tamilselvi, R.Prakash, C.Nagarajan,“Solar System Integrated Smart Grid Utilizing Hybrid Coot-Genetic Algorithm Optimized ANN Controller” Iranian Journal Of Science And Technology-Transactions Of Electrical Engineering, DOI10.1007/s40998-025-00917-z,2025
15. S.Tamilselvi, R.Prakash, C.Nagarajan,“ Adaptive sliding mode control of multilevel grid-connected inverters using reinforcement learning for enhanced LVRT performance” Electric Power Systems Research 253 (2026) 112428, doi.org/10.1016/j.epsr.2025.112428
16. S.Thirunavukkarasu, C. Nagarajan, 2024, “Performance Investigation on OCF and SCF study in BLDC machine using FTANN Controller," Journal of Electrical Engineering And Technology, Volume 20, pages 2675–2688, (2025), doi.org/10.1007/s42835-024-02126-w
17. C. Nagarajan, M.Madheswaran and D.Ramasubramanian- ‘Development of DSP based Robust Control Method for General Resonant Converter Topologies using Transfer Function Model’- Acta Electrotechnica et Informatica Journal , Vol.13 (2), pp.18-31,April-June.2013, DOI: 10.2478/aeei-2013-0025.
18. C.Nagarajan and M.Madheswaran - ‘DSP Based Fuzzy Controller for Series Parallel Resonant converter’- Springer, Frontiers of Electrical and Electronic Engineering, Vol. 7(4), pp. 438-446, Dec.12. DOI 10.1007/s11460-012-0212-0.
19. C.Nagarajan and M.Madheswaran - ‘Experimental Study and steady state stability analysis of CLL-T Series Parallel Resonant Converter with Fuzzy controller using State Space Analysis’- Iranian Journal of Electrical & Electronic Engineering, Vol.8 (3), pp.259-267, September 2012.
20. C.Nagarajan and M.Madheswaran, “Analysis and Simulation of LCL Series Resonant Full Bridge Converter Using PWM Technique with Load Independent Operation” has been presented in ICTES’08, a IEEE / IET International Conference organized by M.G.R.University, Chennai.Vol.no.1, pp.190-195, Dec.2007
21. Suganthi Mullainathan, Ramesh Natarajan, “An SPSS and CNN modelling based quality assessment using ceramic materials and membrane filtration techniques”, Revista Materia (Rio J.) Vol. 30, 2025, DOI: https://doi.org/10.1590/1517-7076-RMAT-2024-0721
22. M Suganthi, N Ramesh, “Treatment of water using natural zeolite as membrane filter”, Journal of Environmental Protection and Ecology, Volume 23, Issue 2, pp: 520-530,2022
23. D. Zhou, Y. Fan, G. Deng, F. He, M. Wang, A new design of sugarcane seed cutting systems based on machine vision, Comput. Electron. Agric. 175 (August 2020) 105611C.
24. Prof. Dipak U.Adhapure , Kkolekar Navnath Chandrakantat, Gadhave Akash Shamrao, Kadam Sunil Dattatray, Design Development and Fabrication of Sugarcane Bud Cutting Machine, IJSRD, Volume : 6, Issue : 12.
25. Krishna Prasads, Harish Kumar, Harsha B. G , Harshith .S, Kishan Kumar, Design and Fabrication of Sugarcane Bud Cutting Machine, International Journal of Engineering Science and Computing, July 2017.
26. Ningappa H Kuri, Prof.Reddy Naik.J, Design and Development of Sugar Cane Bud Chipping Machine, international journal of research in aeronautical and mechanical engineering issn (online): 2321-3051, Vol.3 Issue 12, December 2015 Pgs: 97-110
27. Rajkumar.E, Manojkumar.E, Virtual Prototype and 3D Printing of Bud Chipping Machine for Agriculture, International Journal of Innovative Technology and Exploring Engineering (IJITEE) ISSN: 2278-3075,Volume-8, Issue-12S, October 2019.
28. G.Ragupathi, A.Ramesh Kumar, V.Selva Prakash, G.Sivaprakasam, E. Thirumoorth, Design and fabrication of pneumatic sugarcane bud cutting machine, International Journal of Advanced Science and Engineering Research, Vol 2, issue :1, 2017.
29. Roshanlal Vishwakarma, Sugarcane bud chipper, Fifth National Grassroots Innovation, Patent No. 1501/MUM/2008
30. Vishrut Raut, Prof.S.M.Fulmali, Design &Modelling of Mobile Chaff Cutter a Review, International Conference on Ideas, Impact and Innovation in Mechanical Engineering (ICIIIME2017).
31. Chinmay Bandiwadekar, Ajinkya Kamble, VivekGarala, ZuberShaikh. Review Paper on Design & Development of Chaff Cutting Machine. IJSRD - International Journal for Scientific Research & Development| Vol. 4, Issue
32. 02, 2016 | ISSN (online):2321-0613.
33. Kalaiselvan P, Kesavan P, Satheeshkumar p, Karthikeyan m, Sakthivel, Baluvenkatesh, Fabrication And Performance Measurement Of Manually Powered Fodder Cutter, International Journal of Scientific & Engineering Research, Volume 7, Issue 5,May-2016
34. Poornima, G., & Anand, L. (2025). Medical image fusion model using CT and MRI images based on dual scale weighted fusion based residual attention network with encoder-decoder architecture. Biomedical Signal Processing and Control, 108, 107932.
35. Gopinathan, V. R. (2023). Cloud-First AI Security Architecture for Protecting Enterprise Digital Ecosystems and Financial Networks. International Journal of Research and Applied Innovations, 6(6), 10031-10039.
36. Rajasekar, M. (2024). Secure Digital Banking with Federated AI: An AWS Cloud-Based Predictive Analytics Architecture for Financial Risk Intelligence. International Journal of Research and Applied Innovations, 7(3), 10735-10740.
37. Garg, V. K., Soundappan, S. J., & Kaur, E. M. (2020). Enhancement in intrusion detection system for WLAN using genetic algorithms. South Asian Research Journal of Engineering and Technology, 2(6), 62–64. https://doi.org/10.36346/sarjet.2020.v02i06.003
