Smart Helmet using Aurdino
DOI:
https://doi.org/10.15662/IJEETR.2026.0802481Keywords:
Electric Power Steering (EPS), Steering Systems, Electronic Control Strategies, ; Energy Efficiency, Advanced Driver Assistance Systems (ADAS)Abstract
The Smart Helmet using Arduino is an advanced safety solution developed to reduce road accidents and improve rider protection. This system integrates an Arduino microcontroller with various sensors and communication modules to ensure safe riding conditions. It includes a helmet detection sensor that ensures the rider is wearing the helmet and an alcohol sensor that checks whether the rider is under the influence of alcohol. If any unsafe condition is detected, the system prevents the ignition of the vehicle, thereby avoiding potential accidents
Additionally, the helmet is equipped with an accident detection mechanism using vibration or tilt sensors to identify sudden impacts or crashes. In such situations, the system automatically sends an emergency alert message along with the rider’s real-time location to predefined contacts using GSM and GPS modules. This enables quick response and timely medical assistance
The Smart Helmet is a cost-effective, reliable, and userfriendly system that combines automation and real-time monitoring. It plays a significant role in enhancing road safety by ensuring rule compliance and providing immediate help during emergencies
References
1. Manjesh, N., Sudarshan Raj, “Smart Helmet Using GSM & GPS Technology for Accident Detection and Reporting System,” International Journal of Electrical and Electronics Research, Vol. 2, Issue 4, 2014.
2. Rasli, M. K. A. M., Madzhi, N. K., Johari, J., “Smart Helmet with Sensors for Accident Prevention,” International Conference on Electrical, Electronics and System Engineering (ICEESE), IEEE, 2013.
3. Impana, H. C., Hamsaveni, M., Chethana, H. T., “A Review on Smart Helmet for Accident Detection using IoT,” EAI Endorsed Transactions on Internet of Things, Vol. 5, No. 20, 2019.
4. SIMCom, “SIM800L GSM/GPRS Module Hardware Design,” SIMCom Wireless Solutions, 2015.
5. “Design Smart Helmet System with GSM for Safety Monitoring Systems,” International Journal of Scientific Research in Science and Technology, 2025.
6. Patil, S., et al., “Smart Motorcycle Security System,” International Conference on Emerging Trends in Engineering, Technology and Science (ICETETS), IEEE, 2016.
7. Li, S., et al., “Smart Helmet with Fall Detection and Emergency Alarm System,” IEEE International Conference on Robotics and Automation (ICRA), 2018.
8. Experimental study on electrical discharge machining of Inconel using RSM and NSGA optimization technique R. Senthil Kumar and P. Suresh, “Experimental study on electrical discharge machining of Inconel using RSM and NSGA optimization technique,” Journal of the Brazilian Society of Mechanical Sciences and Engineering, vol. 41, no. 5, pp. 1–14, 2019.
9. Impact of the shape of electrode-tool on radical overcut of micro-hole in electrochemical micromachining R. Thanigaivelan, R. Senthilkumar, R. M. Arunachalam, and N. Natarajan, “Impact of the shape of electrode-tool on radical overcut of micro-hole in electrochemical micromachining,” Surface Engineering and Applied Electrochemistry, vol. 53, no. 5, pp. 486–492, 2017.
10. Study on tool steel machining with ZNC EDM by RSM, GREY and NSGA S. Kumar Ramuvel and S. Paramasivam, “Study on tool steel machining with ZNC EDM by RSM, GREY and NSGA,” Journal of Materials Research and Technology, vol. 9, no. 3, pp. 3885–3896, 2020.
11. R. Senthilkumar, K. Tamizharasan, T. Sowndharya, and M. Kirthikajain, “Fabrication and Analysis of Regenerative Braking System,” Journal for Research, vol. 3, no. 2, 2017.
12. Investigation over the surface integrity of Tungsten Carbide using ZNC-EDM
R. Senthil Kumar and P. Suresh, “Investigation over the surface integrity of Tungsten Carbide using ZNC-EDM,” International Journal of Management Technology and Engineering, vol. 9, no. 1, pp. 1–6, 2019.
13. Kumar, R. S., Perumal, S., Chandru, M., & Nanthakumar, S. (2026). ESP-32 quadx drone. International Journal of Engineering & Extended Technologies Research (IJEETR), 8(2), 4529–4537.
14. Kumar, R., Perumal, S., Sriram, G., & Seshathri, S. (2026). Electrical steering system in automobile. International Journal of Engineering & Extended Technologies Research (IJEETR), 8(2), 4539–4549.
15. Venkatachalam, R., Ashokan, A., Ganesan, M. P., Perumal, S., Pandian, B., & Pant, R. (2026). Optimization of pyrolysis parameters for enhanced bio-oil yield from lignocellulosic biomass using response surface methodology. Renewable Energy. (SCI, submitted for publication).
16. Ashokan, A., Murugesan, S., Muthaiyan, R., Arumugam, S., & Perumal, S. (2025). Numerically analyzing a heat transmission in blood using a cardioplegia concentric tube heat exchanger during open cardiac surgery. International Journal of Environmental Sciences, 11(18s).
17. Senthilkumar, R., Perumal, S., & Vinoth, A. (2025). A smart waste management system using IoT. International Journal of Scientific Development and Research, 10(5), d351–d360.
18. Perumal, S., Arunkumar, N., Gopi Krishna, B., Kirubainathan, S., & Navukkarasar, M. (2025). Smart AI-powered chatbot using ESP8266 for real-time responses. International Journal of Scientific Development and Research, 10(5), d357–d364.
19. Senthilkumar, R., Perumal, S., & Vishal, R. D. (2025). AI-powered drone for electricity pylon inspection. International Journal of Scientific Development and Research, 10(5), d617–d627.
20. Senthilkumar, R., Perumal, S., & Vinoth, A. (2025). A smart waste management system using IoT. International Journal of Scientific Development and Research, 10(5), d351–d360.
21. Vasanthamohan, R., Senthil Kumar, R., Perumal, S., Bagavathi, T., Karthikeyan, M., & Ranjith, R. (2024). Arm based pick and place robot vehicle using IoT. International Journal of Advances in Engineering and Management (IJAEM), 6(4), 185–194.
22. C.Nagarajan and M.Madheswaran - ‘Stability Analysis of Series Parallel Resonant Converter with Fuzzy Logic Controller Using State Space Techniques’- Taylor &Francis, Electric Power Components and Systems, Vol.39 (8), pp.780-793, May 2011. DOI: 10.1080/15325008.2010.541746
23. C.Nagarajan and M.Madheswaran - ‘Experimental verification and stability state space analysis of CLL-T Series Parallel Resonant Converter’ - Journal of Electrical Engineering, Vol.63 (6), pp.365-372, Dec.2012. DOI: 10.2478/v10187-012-0054-2
24. C.Nagarajan and M.Madheswaran - ‘Performance Analysis of LCL-T Resonant Converter with Fuzzy/PID Using State Space Analysis’- Springer, Electrical Engineering, Vol.93 (3), pp.167-178, September 2011. DOI 10.1007/s00202-011-0203-9
25. S.Tamilselvi, R.Prakash, C.Nagarajan,“Solar System Integrated Smart Grid Utilizing Hybrid Coot-Genetic Algorithm Optimized ANN Controller” Iranian Journal Of Science And Technology-Transactions Of Electrical Engineering, DOI10.1007/s40998-025-00917-z,2025
26. S.Tamilselvi, R.Prakash, C.Nagarajan,“ Adaptive sliding mode control of multilevel grid-connected inverters using reinforcement learning for enhanced LVRT performance” Electric Power Systems Research 253 (2026) 112428, doi.org/10.1016/j.epsr.2025.112428
27. S.Thirunavukkarasu, C. Nagarajan, 2024, “Performance Investigation on OCF and SCF study in BLDC machine using FTANN Controller," Journal of Electrical Engineering And Technology, Volume 20, pages 2675–2688, (2025), doi.org/10.1007/s42835-024-02126-w
28. C. Nagarajan, M.Madheswaran and D.Ramasubramanian- ‘Development of DSP based Robust Control Method for General Resonant Converter Topologies using Transfer Function Model’- Acta Electrotechnica et Informatica Journal , Vol.13 (2), pp.18-31,April-June.2013, DOI: 10.2478/aeei-2013-0025.
29. C.Nagarajan and M.Madheswaran - ‘DSP Based Fuzzy Controller for Series Parallel Resonant converter’- Springer, Frontiers of Electrical and Electronic Engineering, Vol. 7(4), pp. 438-446, Dec.12. DOI 10.1007/s11460-012-0212-0.
30. C.Nagarajan and M.Madheswaran - ‘Experimental Study and steady state stability analysis of CLL-T Series Parallel Resonant Converter with Fuzzy controller using State Space Analysis’- Iranian Journal of Electrical & Electronic Engineering, Vol.8 (3), pp.259-267, September 2012.
31. C.Nagarajan and M.Madheswaran, “Analysis and Simulation of LCL Series Resonant Full Bridge Converter Using PWM Technique with Load Independent Operation” has been presented in ICTES’08, a IEEE / IET International Conference organized by M.G.R.University, Chennai.Vol.no.1, pp.190-195, Dec.2007
32. Suganthi Mullainathan, Ramesh Natarajan, “An SPSS and CNN modelling based quality assessment using ceramic materials and membrane filtration techniques”, Revista Materia (Rio J.) Vol. 30, 2025, DOI: https://doi.org/10.1590/1517-7076-RMAT-2024-0721
33. M Suganthi, N Ramesh, “Treatment of water using natural zeolite as membrane filter”, Journal of Environmental Protection and Ecology, Volume 23, Issue 2, pp: 520-530,2022
34. Senthil Kumar, R., Perumal, S., Lokesh, K., Venkatesh, C., Ajithkumar, M., & Sanjay Kumar, M. (2024). An IoT based industrial platform for remote real-time power plant monitoring. International Journal of Advances in Engineering and Management (IJAEM), 6(4), 376–388.
35. Senthil Kumar, R., Perumal, S., Kaviya, P., Ajay, M., Gokulakannan, K., & Gowtham, S. (2024). Solar smart air pollution monitoring framework using Arduino and IoT applications. International Journal of Advances in Engineering and Management (IJAEM), 6(4), 147–185.
36. Perumal, S., Johnrajan, A., Raja, S., Praveenkumar, V., & Arun Kumar, K. (2023). A systematic review of hybrid renewable energy systems about their optimization techniques with analytic hierarchy process. International Journal of Power System Operation and Energy Management, 3(3), 147–185. https://doi.org/09.0014.MSJ
37. Perumal, S., Madheswaran, M., Ragul, N., Srilakshman, T., & Naveenkumar, R. (2023). CFD analysis of ground heat exchanger by different configurations. Mukt Shabd Journal, 7(5). https://doi.org/09.0014.MSJ
38. Raman, M., Perumal, S., Muthusamy, S., & Subramaniam, S. (2022). Studies on diesel engine exhaust gas for retrieving the waste heat through triple tube heat exchanger (TTHE) through different tubes. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 44(2), 4149–4164.
39. Perumal, S., & Mohan, R. (2020). Numerical and experimental study of a triple concentric tube heat exchanger for waste heat recovery from engine exhaust gas. Thermal Science, 6(2), 216–228.
40. Palanisamy, P., Perumal, S., & Manojkumar, P. (2021). Optimization of process parameters on reliability for twisted drill life in drilling. International Journal of Engineering Research & Technology, 1(1).
41. Perumal, S., Naveenkumar, D., Manikandan, M., & Mohan Kumar, M. (2020). Experimental investigation of triple tube heat exchanger for waste heat recovery from IC engine exhaust gas. International Journal for Scientific Research and Development, 3(3).
42. Murali, T., Perumal, S., Lijo, S., & Sasidharan, S. (2020). Design and synthesis of six-legged walking robot using single degree of freedom linkage. Global Research and Development Journal, 2(3).
43. Perumal, S., Mohan, R., Sasidharan, S., & Venkadesh, K. (2017). Study on concentric tube heat exchanger with different nanofluids for enhancing the heat transfer: A review. International Journal of Impotence Research, 3(9).
44. Perumal, S., Manikandan, T., Mounaraj, K., & Mubarak, S. (2017). Design and synthesis of multipurpose hand driller machine for various processes. International Journal of Science Technology and Engineering, 4(3).
45. Senthilkumar,K., Perumal, S., Mohan, R., & Kalidoss, K. (2016). Numerical analysis of triple concentric tube heat exchanger using dimpled tube geometry. Asian Journal of Research in Social Sciences and Humanities, 6(8), 2078–2088.
46. Murali, T., Perumal, S., Mohan, R., & Palanisamy, P. (2016). Design and synthesis of six-legged walking robot using single degree of freedom linkage. International Journal of Impotence Research, 2(3).
47. Perumal, S., Mohan, R., Palanisamy, P., & Senthilkumar, K. (2015). Study on double pipe heat exchanger using different enhancement techniques. International Journal of Impotence Research, 5(1).
48. Perumal, S., Senthilkumar, K., Palanisamy, P., & Vinoth, R. (2014). Numerical study of a concentric tube heat exchanger using dimpled tubes with Al2O3 nanofluid. Australian Journal of Basic and Applied Sciences, 8(7), 185–193.
